# Figuren-Set B — Stilisierte Minifiguren (runder Sockel)

Finaler Satz (v0.5): **16 Einzelrollen** + **3 Team-Sonderfiguren**. Alle auf dem
**gleichen schlanken runden Sockel**, damit sie als geschlossenes Set wirken und
gleichmäßig auf den Standfeldern stehen. **Die SOR ist keine Figur**, sondern ein
Gremium an den Gate-Tiles (siehe `README_spielfiguren.md` / `../01_3D-Druck/openscad/gate-tile.scad`).

> **Wichtig (v0.6):** Figuren werden **gestellt, nicht gesteckt** (flacher Boden,
> kein Pin). **Sockel Ø 20 mm, Figurenhöhe ~50 mm.** Standfelder/Raster sind darauf
> ausgelegt (Aktiv-Feld Pitch 24 mm).

## Style-Bible (gilt für ALLE Figuren — vor jeden Prompt setzen)

> `Stylized board-game miniature character in matte PLA, chunky friendly proportions
> (large head, simplified body, no thin fragile parts), standing on an identical
> small flat ROUND disc base ~20mm diameter (no pin, flat underside). Figure height
> ~50mm including base. Clean technical product render, neutral light-grey studio
> background, soft studio light, isometric, high detail, tiny role abbreviation
> engraved on the base rim.`

**Damit das Set zusammenpasst:**
- **Identischer flacher Rundsockel** für jede Figur (**Ø 20 mm**, kein Pin), Figur ~50 mm hoch.
- Gleiche **Proportionen**; variiert wird nur Pose + Attribut.
- **Farbe = Kategorie:** Governance Gold · Umfeld/Auftraggeber Bordeaux (`#7d2e3f`) ·
  Management Blau · Operative Grau · Externe Weiß · Teams Grün. **Exakte Töne frei —
  nur Unterscheidbarkeit zählt; fehlt eine Farbe, beliebige gut abgrenzbare nehmen.**
- Keine dünnen, bruchgefährdeten Teile (druck- & spielfest).

> **Team-Sonderfiguren (grün):** **mehrere Mini-Figuren auf EINEM Sockel** (Trio),
> damit klar ist: Team, keine Einzelrolle. Gleicher Sockel-Durchmesser wie
> Einzelfiguren (ggf. minimal breiter, aber im selben Stil).

---

# GOVERNANCE — Gold

### SPM — Service-Portfolio-Manager
```
gold matte miniature character, confident standing pose, wearing a small pointed crown, holding up a fanned spread of three tiny service tiles in one hand, the other hand on a small ship's-wheel/compass, "SPM" engraved on the round base rim.
```

### SO — Service Owner
```
gold matte miniature character, protective stance cradling a single glowing round service orb with a tiny name-plate against its chest, a key pendant at the neck, "SO" engraved on the round base rim.
```

---

# UMFELD / AUFTRAGGEBER — Bordeaux (#7d2e3f)

### AML — Amtsleitung
```
deep bordeaux matte miniature character, dignified pose wearing an official chain/sash of office, holding a stamped official document, a small town-hall building crest on the chest, "AML" engraved on the round base rim.
```

### SHM — Stakeholder Manager
```
deep bordeaux matte miniature character, holding up a small network diagram of connected figures, a handshake icon at the base, friendly mediating pose, "SHM" engraved on the round base rim.
```

### DPM — Demand Portfolio Manager
```
deep bordeaux matte miniature character, holding a funnel that collects small incoming request tickets onto a portfolio board, an inbox tray motif, "DPM" engraved on the round base rim.
```

---

# MANAGEMENT — Blau

### OP — Operations Manager
```
blue matte miniature character, sturdy pose, torso stylized with a small gear and a running heartbeat-monitor line, holding a control dashboard panel, "OP" engraved on the round base rim.
```

### SSM — Service Support Manager
```
blue matte miniature character wearing a headset with a boom mic, holding a clipboard with a checkmark, organizing/directing pose, "SSM" engraved on the round base rim.
```

### PRM — Problem Manager
```
blue matte miniature character in a detective pose holding an oversized magnifying glass near its face, a small root/branch pattern at its feet, "PRM" engraved on the round base rim.
```

### PL — Projektleitung
```
blue matte miniature character wearing a hard hat, holding a clipboard with a Gantt-bar chart, raising a small pennant baton in the other hand, "PL" engraved on the round base rim.
```

### ISB — Informationssicherheitsbeauftragter
```
blue matte miniature character holding a shield with a padlock emblem, a small key at the belt, watchful protective stance, "ISB" engraved on the round base rim.
```

---

# OPERATIVE / FACHEXPERTEN — Grau

### QK — Queue Koordinator
```
grey matte miniature character in a traffic-controller pose holding a signal paddle, branching routing arrows on the round base surface, "QK" engraved on the round base rim.
```

### 1ST — 1st Level Agent
```
grey matte miniature character, slim friendly pose wearing a headset, a large number "1" on its chest, "1ST" engraved on the round base rim.
```

### 2ND — 2nd Level Agent
```
grey matte miniature character wearing a headset, holding a screwdriver, a large number "2" on its chest, leaning over an opened device, "2ND" engraved on the round base rim.
```

### TM — Testmanager
```
grey matte miniature character holding a shield with a large checkmark, a small test tube at the belt, inspecting pose, "TM" engraved on the round base rim.
```

### IAR — IT-Architekt
```
grey matte miniature character holding an open drafting compass over a small blueprint, a ruler in the other hand, "IAR" engraved on the round base rim.
```

---

# EXTERNE — Weiß

### DSL — Dienstleister
```
white matte miniature character carrying a shipping crate on one shoulder, a small delivery label, friendly delivering pose, "DSL" engraved on the round base rim.
```

---

# TEAMS (Sonderfiguren) — Grün
*Mehrere Figuren auf EINEM gemeinsamen Sockel — als „Team" lesbar.*

### Betrieb — Betriebsteam
```
green matte miniature: three chunky figures grouped together on one shared flat round disc base, a gear and a heartbeat-monitor line motif between them, busy working pose, "Betrieb" engraved on the round base rim.
```

### Support — Service-Support-Team
```
green matte miniature: three chunky figures grouped on one shared flat round disc base, each wearing a small headset, a speech bubble above the group, "Support" engraved on the round base rim.
```

### Projekt — Projektteam
```
green matte miniature: three chunky figures grouped on one shared flat round disc base, leaning over a rolled-out blueprint with a wrench beside them, "Projekt" engraved on the round base rim.
```

---

## Set-Render (alle Figuren zusammen)
```
Group product render of the complete set of stylized matte PLA board-game miniatures,
all on identical flat round disc bases (no pins), arranged in rows by colour category:
gold (governance), deep bordeaux (umfeld/auftraggeber), blue (management),
grey (operatives), white (external), and three green TEAM figures (multiple figures
on one base). Consistent chunky proportions, neutral grey background, soft studio
light, isometric, cohesive collectible set look, minimal engraved labels.
```

## Hinweise
- Attribute (Krone, Lupe, Headset, Kiste, Schloss) ggf. als separate Aufsteck-/Anbauteile drucken → weniger Stützstruktur.
- Identischer Sockel ist das verbindende Element — als gemeinsames Basis-Modul anlegen, Figuren darauf setzen.
- Team-Figuren: 3 Figuren auf einem Sockel, gleicher Sockel-Durchmesser, im selben Stil.
- Verbindliche Maße: [`../01_3D-Druck/materialliste.md`](../01_3D-Druck/materialliste.md). Diese Prompts sind Orientierungsbilder, keine Maßvorlage.