SLC_Game/02_Spielfiguren/figuren-set-b_minifiguren.md

# Figuren-Set B — Stilisierte Minifiguren (runder Sockel)

Track-B-Umsetzung für **alle 16 Rollen**: charaktervolle, brettspieltypische
Minifiguren — alle auf dem **gleichen schlanken runden Sockel**, damit sie in
dieselben Steckplätze (Tile-Reihe **und** Gate, Ø 4,2 mm) passen und als
geschlossenes Set wirken.

> **Wichtig (v0.3):** Da bei jeder Aktivität mehrere Figuren in einer Zonen-Reihe
> des **Aktiv-Felds** (neben dem Action-Stein) stehen (Pitch **8 mm**), muss der
> Sockel **schlank** sein (Ø ≤ 8 mm) und der Pin **Ø 4,0 mm**. Kein breiter
> Diorama-Sockel — sonst kollidieren Nachbarfiguren.

Rollenquelle: [`spm_rollen.yaml`](../../../%2302_service-portfolio-management/02.1_spm_konzepte/02_spm_service-lifecycle-blueprint/spm_rollen.yaml) (v1.1).

---

## Style-Bible (gilt für ALLE 16 Figuren — vor jeden Prompt setzen)

> `Stylized board-game miniature character in matte PLA, chunky friendly proportions
> (large head, simplified body, no thin fragile parts), standing on an identical
> small ROUND disc base ~8mm diameter with a centered round pin foot Ø4mm
> underneath. Figure height ~22mm including base. Clean technical product render,
> neutral light-grey studio background, soft studio light, isometric, high detail,
> tiny role abbreviation engraved on the back of the base.`

**Damit das Set zusammenpasst:**
- **Identischer schlanker Rundsockel** für jede Figur (Ø ~8 mm, gleiche Höhe, Pin Ø 4 mm) — passt in Tile-Reihe und Gate.
- Gleiche **Proportionen** (großer Kopf, gedrungener Körper) — variiert wird nur Pose + Attribut.
- **Farbe = Kategorie:** Governance Gold/Gelb · Management Blau · Teams Grün · Operative Grau · Externe Weiß.
- Attribut/Requisit darf in Kontrastton abgesetzt sein.
- Keine dünnen, bruchgefährdeten Teile (druck- & spielfest).

> **Ausnahme Sammelfiguren (SOR, Teams):** Diese dürfen einen breiteren Sockel
> haben (Diorama/Trio). Sie stehen dann **neben** dem Aktiv-Feld bzw. überspannen
> 2 Steckplätze einer Zone — nicht einzeln in der schmalen 8-mm-Reihe.
> Einzelrollen bleiben beim schlanken Ø-8-mm-Sockel.

---

# GOVERNANCE — Gold/Gelb

### SPM — Service-Portfolio-Manager
Strategischer Steuermann des ganzen Portfolios.
```
gold matte miniature character, confident standing pose, wearing a small pointed crown, holding up a fanned spread of three tiny service tiles in one hand, the other hand resting on a small ship's-wheel/compass, "SPM" engraved on the round base rim.
```

### SO — Service Owner
Hütet einen einzelnen Service end-to-end.
```
gold matte miniature character, protective stance cradling a single glowing round service orb with a tiny name-plate against its chest, a key pendant hanging at the neck, "SO" engraved on the round base rim.
```

### SOR — Service Operations Runde *(Gremium)*
Marker-Figur: das Entscheider-Gremium.
```
gold matte miniature marker on the same round disc base: a miniature round council table with four tiny stylized seats around it and a small judge's gavel standing upright in the center, "SOR" engraved on the round base rim.
```

---

# MANAGEMENT — Blau

### AL B&C — Abteilungsleitung Basis & Cloud
Infrastruktur: Netze, Server, Cloud.
```
blue matte miniature character, sturdy pose, torso stylized as a small ribbed server rack, a little cloud floating just above the head, holding a server module under one arm, "AL B&C" engraved on the round base rim.
```

### AL App — Abteilungsleitung Applikationen
Anwendungen, Fachverfahren.
```
blue matte miniature character, holding an upright glowing application window panel with a title bar and three dots, a small "</>" badge on the chest, "AL App" engraved on the round base rim.
```

### Sup Mgr — Support Manager
Organisiert & sichert den Support.
```
blue matte miniature character wearing a headset with a boom mic, holding a clipboard with a checkmark, organizing/directing pose, "Sup Mgr" engraved on the round base rim.
```

### Prob Mgr — Problem Manager
Root-Cause-Jäger.
```
blue matte miniature character in a detective pose holding an oversized magnifying glass up near its face, a small root/branch pattern at its feet, "Prob Mgr" engraved on the round base rim.
```

### PL — Projektleitung
Taktgeber des Projekts.
```
blue matte miniature character wearing a hard hat, holding a clipboard with a Gantt-bar chart, raising a small pennant baton in the other hand, "PL" engraved on the round base rim.
```

---

# TEAMS (Sammelfiguren) — Grün
*Als „mehrere Personen" lesbar — Trio auf einem gemeinsamen runden Sockel.*

### Betrieb — Betriebsteam
Laufender Betrieb, Monitoring, Deployment.
```
green matte miniature: three chunky figures grouped together on one shared round disc base, a gear and a heartbeat monitor line motif between them, busy working pose, "Betrieb" engraved on the round base rim.
```

### Support — Service-Support Team
1st/2nd-Level, Nutzeranfragen.
```
green matte miniature: three chunky figures grouped on one shared round disc base, each wearing a small headset, a speech bubble above the group, "Support" engraved on the round base rim.
```

### Projekt — Projektteam
Entwicklung, Test, Doku, Übergabe.
```
green matte miniature: three chunky figures grouped on one shared round disc base, leaning over a rolled-out blueprint with a wrench beside them, "Projekt" engraved on the round base rim.
```

---

# OPERATIVE EINZELROLLEN — Grau

### Queue Koord — Queue Koordinator
Ticket-Lotse.
```
grey matte miniature character in a traffic-controller pose holding a signal paddle, branching routing arrows on the round base surface, "Queue" engraved on the round base rim.
```

### L1 — 1st Level Agent
Erste Anlaufstelle.
```
grey matte miniature character, slim friendly pose wearing a headset, a large number "1" on its chest, "L1" engraved on the round base rim.
```

### L2 — 2nd Level Agent
Tiefe Analyse.
```
grey matte miniature character wearing a headset, holding a screwdriver, a large number "2" on its chest, leaning over an opened device, "L2" engraved on the round base rim.
```

### Test Mgmt — Testmanagement
Prüft Betriebsreife.
```
grey matte miniature character holding a shield with a large checkmark, a small test tube at the belt, inspecting pose, "Test" engraved on the round base rim.
```

### Arch — Architektur
Standards & Zielarchitektur.
```
grey matte miniature character holding an open drafting compass over a small blueprint, a ruler in the other hand, "Arch" engraved on the round base rim.
```

---

# EXTERNE — Weiß

### Lieferant — Lieferant / Hersteller / Entwickler
Liefert externe Komponenten.
```
white matte miniature character carrying a shipping crate on one shoulder, a small delivery label, friendly delivering pose, "Lieferant" engraved on the round base rim.
```

---

## Set-Render (alle Figuren zusammen)
Für ein Übersichtsbild des kompletten Sets:
```
Group product render of a complete set of stylized matte PLA board-game miniatures,
all standing on identical round disc bases, arranged in rows by color category:
gold (governance) front row, blue (management), green (team trios), grey (operatives),
white (external) — consistent chunky proportions and base, neutral grey background,
soft studio light, isometric, cohesive collectible set look, minimal engraved labels.
```

## Hinweise
- Attribute (Krone, Lupe, Headset, Kiste) ggf. als separate Aufsteck-/Anbauteile drucken → weniger Stützstruktur, mischbar.
- Identischer Sockel ist hier das verbindende Element — bei der Modellierung als **gemeinsames Basis-Modul** anlegen und die Figuren darauf setzen.
- Verbindliche Maße: [`materialliste.md`](../01_3D-Druck/materialliste.md) und die OpenSCAD-Modelle. Diese Prompts sind Konzept-/Orientierungsbilder, keine Maßvorlage.