126 lines
6.7 KiB
Markdown
126 lines
6.7 KiB
Markdown
# Visual-Prompts für den 3D-Druck-Producer
|
||
|
||
Diese Prompts erzeugen **Orientierungs-Renderings** (kein Marketing-Bild),
|
||
die dem Producer Form, Proportion und Steckmechanik der Bauteile zeigen.
|
||
Empfohlen für Bildmodelle wie Nano Banana / Imagen. Englisch erzielt meist die
|
||
sauberste Geometrie; Beschriftungen bewusst sparsam halten.
|
||
|
||
> **Board-Layout:** linear (durchgehende Bahn), **kein Kreis**.
|
||
> **Wichtig:** die **einseitigen, entnehmbaren Aktivitätsplättchen** müssen
|
||
> sichtbar sein — einige liegen flach in der Verankerung (Code-Seite oben),
|
||
> einige sind herausgenommen und liegen daneben (Rückseite leer), sodass die
|
||
> **freie Verankerung** erkennbar ist (dort steht dann der Action-Stein).
|
||
> *(Stand v0.2-Renderings — Erklärung liegt inzwischen in der App, nicht auf der
|
||
> Rückseite; RACI-Aktiv-Feld + verschlankte Figuren sind hier noch nicht abgebildet.)*
|
||
|
||
---
|
||
|
||
## Prompt A — Bauteil-Übersicht (Exploded-Style)
|
||
|
||
```
|
||
Clean technical product render, neutral light-grey studio background, exploded
|
||
view of a set of 3D-printed tabletop game components in matte PLA. Show: a square
|
||
modular base tile (100x100mm) with puzzle-tab edges and a round centered recess;
|
||
a round blank insert disc (~60mm) that fits the recess, its flat top carrying a
|
||
round printed label sticker; a cylindrical game token
|
||
with a wide weighted base and a vertical card slot on top; a small upright
|
||
arch-shaped "gate" with marked stand spots at its base; a meeple figure with a
|
||
flat round base. Parts floating slightly apart to show how they relate. Soft shadows,
|
||
isometric angle, high detail, dimension-focused, minimal text.
|
||
```
|
||
|
||
## Prompt B — Aktivitätsplättchen: einseitig & entnehmbar
|
||
|
||
```
|
||
Close-up technical render of round blank game discs in matte PLA, each about 60mm
|
||
diameter and 4mm thick with a chamfered edge for easy gripping, the flat top face
|
||
carrying a round printed label sticker with a short activity code. Three discs
|
||
shown: one sitting flush inside a square tile's round recess, one lifted out by
|
||
fingers, and one blank disc with the round sticker beside it. The empty recess of
|
||
one tile is clearly visible (this is where the upright action token will stand).
|
||
Emphasis on the removable fit and the re-stickerable blank top. Neutral grey
|
||
background, soft studio light, shallow depth of field, premium board-game
|
||
component photography.
|
||
```
|
||
|
||
## Prompt C — Action-Stein im Detail
|
||
|
||
```
|
||
Close-up technical render of a single 3D-printed game token, matte white PLA.
|
||
Cylindrical body on a wide round base, with a vertical slot on top holding an
|
||
upright rectangular card. The base diameter is clearly wider than the body for
|
||
stability. The token stands inside a square tile's round recess (the same recess
|
||
that normally holds an activity disc). Quarter-section cutaway shows a hexagonal
|
||
cavity in the base for a metal weight. Neutral grey background, soft studio
|
||
lighting, isometric, emphasis on proportions and the card slot fit, no decorative
|
||
text.
|
||
```
|
||
|
||
## Prompt D — Gate-Tor mit Rollen-Standfeldern
|
||
|
||
```
|
||
Technical product render of a small upright arch-shaped game piece in matte PLA,
|
||
like a doorway about 100mm tall with 90mm clear opening, 8mm thick. Two flat feet
|
||
at the base spanning two tiles of a straight track. A row of four small shallow
|
||
engraved circular stand spots along the front base edge where figures are placed.
|
||
A thin horizontal slot across the top of the arch holding a small reference card.
|
||
A flat-based meeple figure stands on one of the marked spots. Neutral background,
|
||
isometric, soft shadows, focus on the stand-spot markings, minimal text.
|
||
```
|
||
|
||
## Prompt E — Tile-Steckmechanik (gerade Bahn)
|
||
|
||
```
|
||
Top-down and slight-angle technical render of four square modular game tiles
|
||
(matte PLA, different solid colors: blue, orange, green, teal) connected via
|
||
puzzle-tab edges into a STRAIGHT row / track. Each tile has a round recessed socket
|
||
in its center: two sockets hold flat round single-sided discs (engraved code on
|
||
top), one socket is empty showing the recess, one holds a small upright arch gate. Clean grey background, soft light, isometric, emphasis on how
|
||
tiles interlock into a straight line, minimal text.
|
||
```
|
||
|
||
## Prompt F — Komplettaufbau (Referenz für Proportionen)
|
||
|
||
```
|
||
Wide isometric technical render of a fully assembled LINEAR tabletop game on a
|
||
neutral surface: square color-coded tiles connected into a long straight track
|
||
left to right through five color zones (blue, orange, green, teal, purple); two of
|
||
the zones (green and teal) sit side by side with two curved arrows forming a small
|
||
loop between them; three upright arch gates stand on the track; small meeple figures
|
||
placed at the gates; round single-sided activity discs sit in the tile sockets with
|
||
a couple lifted out leaving empty sockets; one cylindrical token with an
|
||
upright card stands in a socket; at the right end two exit arrows lead off the board.
|
||
Matte PLA materials, soft studio lighting, clean and diagrammatic,
|
||
proportion-accurate, minimal text.
|
||
```
|
||
|
||
## Prompt G — Gesamtaufbau, 40 Einzeltiles (Tisch-Optik)
|
||
|
||
> Hinweis: Bild-KIs zählen nicht zuverlässig — die exakte Tile-Zahl ist über
|
||
> [`board-layout.svg`](board-layout.svg) garantiert. Dieser Prompt liefert die
|
||
> **Optik/Stimmung**, nicht die exakte Anzahl. Raster explizit vorgeben erhöht
|
||
> die Trefferquote.
|
||
|
||
```
|
||
Isometric high-angle photograph of a complete modular tabletop board on a large
|
||
wooden meeting table, spanning about 1.2 meters. The board is assembled from many
|
||
small individual square puzzle tiles interlocking via tab-and-slot edges; each tile
|
||
is one lifecycle step. Tiles are color-grouped into five phases laid out as fixed
|
||
grids: DESIGN (blue) 4 tiles, TRANSITION (orange) 12 tiles with three of them marked
|
||
by a small upright arch gate, OPERATION (green) 7 tiles, SUPPORT (teal) 11 tiles,
|
||
REVIEW (purple) 6 tiles. Each tile has a round recessed socket holding a flat
|
||
single-sided disc; a few discs are lifted out leaving empty sockets. Between the green and teal phases two curved arrows form a
|
||
small loop; two exit arrows leave the purple phase at the right. A cylindrical token
|
||
with an upright card stands in a socket at the start. A coffee mug and notebook give
|
||
scale. Soft daylight, matte PLA surfaces, clean modern design, large phase labels
|
||
only, minimal small text.
|
||
```
|
||
|
||
---
|
||
|
||
### Hinweise zum Einsatz
|
||
|
||
- Prompts A–D sind **Bauteil-Referenzen** (für Fertigung), Prompt E zeigt die **Steckmechanik**, Prompt F den **Gesamtaufbau** (lineare Bahn).
|
||
- **Prompt B** zeigt die einseitigen, entnehmbaren Plättchen und die freigelegte Verankerung (dort steht der Action-Stein).
|
||
- Verbindliche Maße stehen in [`materialliste.md`](materialliste.md) und in den OpenSCAD-Modellen — die Bilder dienen nur der Orientierung, nicht als Maßvorlage.
|
||
- Bei unsauberer Geometrie: Anzahl beschriebener Teile pro Prompt reduzieren.
|